Digital Wax Injector (Eishin)
CHARACTERISTICS
High Filling Ability
filling ability is very high since wax is injected after the inside of a rubber mold is vacuumized. A wax pattern with high filling ability is provided for both thin and small materials.
Setting of Small Time Unit
Setting of small time unit is possible.The vacuum time can be set down to 1/100 second and the injection time can be set down to 1/10 second.
■ Temperature Accuracy of ±0.2℃
since temperature control by the wax tank heater is independent from temperature control by
the nozzle heater, the temperature of wax can be set with an accuracy of ±0.2℃.
■ Standby Timer with Heating on
The heating start time can be set at 1-99 hours. It is possible not only to save electric costs
but also to enhance working efficiency by dissolving wax just before the start time of work.
■ Compact Design
the double tank comprises the vacuum tank and the wax tank in a concentric circle, and the unit is compactly designed to be easily installed anywhere.
| SPECIFICATIONS |
| Power supply | Japan and US :single phase AC 100/ 115 V±10%, 50/60 Hz |
| foreign countries excluding US:single phase AC 230 V±10%, 50/60Hz |
|
| Power consumption | 450 VA (maximum)/ fuse: 5A |
| Heater power consumption | band heater: 100/115 V-300 VA,230V-300VA |
| cartridge heater: 100/115 V-40 VA,230V-40VA | |
| Temperature indication range (wax tank and nozzle) |
40.0～99.9 ℃ (103～210 °F) |
| Temperature setting range (wax tank and nozzle) |
40.0～90.0 ℃ (103～193 °F) |
| Setting range of primary pressure | 10～220 kpa |
| Vacuum timer setting range | 0～9.99 seconds／0～99.9 seconds |
| Injection timer setting range | 0～99.9 seconds/0～600 seconds (For use by connecting to the DAC, the setting range on the side of the DAC is 0～99.9 seconds.) |
| Heating start timer | 0～99 hours |
| Wax capacity | around 3 kg |
| Air supply source | 0.40～0.70 MPa/ pressure gauge: 0～0.2 MPa (0～2 kgf/cm2) |
| External dimension | 450 (width)×310 (depth)×450 (height) mm |
| Weight | around 15.5 kg |
ABOUT THE DEMONSTRATION PRODUCTS
◆Jewelry products
Japan：4models of demonstration products are exhibited.
Thailand：4models of demonstration products are exhibited.
China：The demonstration product of RBF-L is exhibited.
◆Recycling products
Japan：5models of demonstration products are exhibited
Reviews
There are no reviews yet.